Electrical and lighting work in Dubai
Wiring, rewiring, panels, sockets, switches and lighting for villas and apartments, done by licensed electricians, with 24/7 emergency service when something trips.
Free estimates. No obligation or upfront payment required.
Signs your wiring needs attention
Electrical faults rarely fix themselves. If you smell burning or see sparks, switch off at the panel if it is safe to do so and call for emergency service.
- Breakers that trip often, or will not stay reset.
- Lights that flicker or dim when the AC or an oven starts.
- Sockets or switch plates that feel warm or show scorch marks.
- A burning smell, buzzing or crackling from a socket, switch or panel.
- Outlets that spark or have stopped working.
- Too few sockets, so power strips run across the floor.
- An old panel with no spare room for new circuits.
What the electrical work covers
From a single socket to a full rewire, by licensed electricians.
Electrical installations
New circuits and fittings for extensions, converted rooms, kitchens and bathrooms.
Lighting solutions
Ceiling, wall and decorative lighting planned room by room, with LED upgrades and smart lighting options.
Wiring and rewiring
Old or damaged wiring replaced, and new runs added so the home can carry the loads you now use.
Circuit breaker repairs
The cause of a tripping breaker found, and the faulty part repaired or replaced.
Outlet and switch installations
More sockets and switches, placed where you will actually use them.
Electrical troubleshooting
Dead circuits, nuisance trips and flickering lights traced to their source.
Panel upgrades
A distribution board with the capacity and protection for new appliances and systems.
A villa lighting job in Al Barsha
Footage from a job in Al Barsha: a technician installing decorative lighting under a villa pergola.
Filmed by our crew on a job in Dubai
What you decide before wiring starts
A few choices up front keep the walls from being opened twice.
- Where do you need sockets and switches?
- Walk each room and think about beds, desks, screens, appliances and where lamps stand. Positions are agreed before anything is cut.
- How should each room be lit?
- Most rooms mix ambient light from ceiling fittings, task light where you read or cook, and accent light on walls or art. Choose the mix per room, then the fittings.
- Do you want dimmers or smart control?
- Dimmers and smart lighting options change what goes behind the wall: switch types, extra wiring and a place for any control equipment. Decide before the walls close.
- Is the panel big enough for what you are adding?
- Extra AC units, a new kitchen or a pool pump all add load. The assessment checks the panel and says whether an upgrade is needed.
- What happens to the walls and ceilings?
- Cables usually run in channels cut into walls or above ceilings, then plastered and painted over. If you are renovating anyway, wiring changes belong at the start.
How an electrical job runs
The same six steps apply to a single circuit or a whole-home rewire.
- 01
Initial consultation and assessment
An electrician looks at the existing wiring and panel, asks what you want changed and notes any faults.
- 02
Planning and design of electrical systems
Circuit layout, socket and switch positions and lighting are agreed with you before any wall is opened.
- 03
Installation or repair of electrical components
New cabling, boards and fittings go in, or the faulty parts are repaired or replaced.
- 04
Thorough testing and inspection
The new and repaired work is tested and inspected before the job is called complete.
- 05
Final adjustments and cleanup
Fittings are adjusted and the work area is cleaned up.
- 06
Customer walkthrough and satisfaction check
You go through the finished work with the team and check it does what you asked. Support continues after the job is done.
Jobs that often go with it
Electrical work usually touches these as well.
Smart-home installationSmart lighting, climate control and home automation wired in.
HVAC and air conditioningAC installation, ductwork, servicing and cleaning for the Dubai heat.
Drywall, plastering and false ceilingsPartitions, smooth walls and gypsum ceilings with lighting built in.
Kitchen remodelingLayout, cabinets, worktops, plumbing, electrics, tiling and flooring in one job.
Electrical questions, answered
Do you offer emergency electrical service?
Yes. Al-Hilal lists 24/7 emergency service for electrical problems. If you smell burning or see sparks, switch off at the panel if it is safe to do so, then call.
Is it safe to do electrical repairs myself?
For safety reasons, electrical work without professional training is strongly discouraged. Mistakes can lead to serious injury or property damage. Switch the circuit off and call a licensed electrician.
Will rewiring mean opening my walls?
Often, yes. Cables usually run inside walls and above ceilings, so some channels are cut and made good afterward. Which areas are affected depends on the age and layout of the home, and a full rewire is easiest to coordinate with a renovation, while the walls are open. Work can be done in stages or during off-hours.
Can you upgrade my lighting to LED or smart lighting?
Yes. LED upgrades and smart lighting options are part of the lighting work. Smart control changes the wiring, so it is planned with the electrician before the walls close. See the smart-home page for the options.
How does the estimate work?
The estimate is free, and no obligation or upfront payment is required to ask for one. Before work begins the quote is broken down step by step so you know exactly what you are paying for.
Electrical and lighting: get a free estimate
Tell us what you want to change. We inspect, measure and send an itemized estimate with every step broken down, so you know exactly what you are paying for before any work starts.
Free estimates. No obligation or upfront payment required.